How to permanently remove mold from the bathroom: for the shower, curtains and tiles

Materials Needed:

• White vinegar
• Baking soda
• Hydrogen peroxide (3%)
• Dish soap
• Spray bottles
• Scrub brush or sponge
• Microfiber cloths
• Rubber gloves
• Protective goggles
• Mask
• Shower curtain liners (if needed)

Steps:

1. Preparation and Safety

• Ventilate the Area: Open windows and doors to ensure proper ventilation.
• Wear Protective Gear: Put on rubber gloves, goggles, and a mask to protect yourself from mold spores and cleaning agents.

2. Removing Mold from Shower Tiles and Grout

• Mix Solution: In a spray bottle, mix one part white vinegar with one part water.
• Apply the Solution: Spray the solution onto the affected tiles and grout, and let it sit for about 15 minutes.
• Scrub the Area: Use a scrub brush or sponge to scrub the mold away. For stubborn areas, you can make a paste with baking soda and water, apply it, and scrub again.
• Rinse and Dry: Rinse the area with water and wipe it dry with a microfiber cloth.

3. Cleaning the Shower Curtain

• Remove the Curtain: Take down the shower curtain and any plastic liners.
• Wash the Curtain: If the curtain is machine-washable, wash it in the washing machine with warm water, a few towels (for extra scrubbing), and a cup of white vinegar. Add a few drops of dish soap to enhance the cleaning power. If the curtain is not machine-washable, soak it in a bathtub filled with warm water and a cup of vinegar, then scrub with a sponge.
• Dry the Curtain: Hang the curtain outside to air dry completely. If needed, replace the liner with a new one.

4. Treating Mold on Shower Heads and Faucets

• Apply Hydrogen Peroxide: Spray 3% hydrogen peroxide on moldy areas and let it sit for 10 minutes.
• Scrub and Rinse: Scrub the areas with a brush, rinse with water, and dry with a microfiber cloth.

5. Preventing Mold Recurrence

• Keep the Bathroom Dry: After each use, squeegee the shower walls and doors to remove excess water.
• Use an Exhaust Fan: Run the exhaust fan during and after showers to reduce humidity.
• Regular Cleaning: Clean bathroom surfaces weekly with a solution of white vinegar and water to prevent mold growth.
• Inspect Regularly: Check for leaks or water damage, as these can contribute to mold growth.

6. Final Touches

• Check and Replace Caulk: If mold has penetrated caulking, remove the old caulk, clean the area thoroughly, and reapply fresh caulk.

By following these steps and maintaining a clean and dry bathroom environment, you can effectively remove and prevent mold growth.